Training on Repairing the Winding Coil of a 1-Phase Electric Water Pump Motor
Article Sidebar
Coil Identification,
Water Pump
Main Article Content
Catra Indra Cahyadi
Usman Usman
Hairul Amren
Inda Tri Pasa
Fauziah Nur
Ivana Wardani
Angga Amanda Putra
Ronaldo Samosir
Abstract
Training skills and how the steps are learned as a learning activity for trainees, as well as starting from the theory about electric motors and practicing sequentially. Understanding each material given in the module is also needed to identify the coil winding of a 1 phase electric motor, especially a water pump. Learning activities are equipped with exercises or evaluations that become a benchmark for the training participants' mastery level. Trainees are expected to understand the explanation from the teaching team so that they can understand well the material that is the basis of repair planning, installing winding sleeves at Cern, winding copper email wire windings to mall boards, attaching windings to the grooves of water pump motors, connecting the main and auxiliary winding coils, tying the windings with nylon thread After finishing winding the wire coil, close the water pump motor that is ready to be rolled again and then test the motor that has been completed in rolling again. After participating in all learning activities in this training, participants are expected to follow the procedures from the planning stages of rolling, installing coil windings, and reinstallation for the quality of winding coils, with good quality and neatness.
Downloads
Article Details
Copyright (c) 2023 Catra Indra Cahyadi, Usman Usman, Hairul Amren, Inda Tri Pasa, Fauziah Nur, Ivana Wardani, Angga Amanda Putra, Ronaldo Samosir
This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.
- Authors retain copyright and acknowledge that the Journal of Multidisciplinary Applied Natural Science is the first publisher, licensed under a Creative Commons Attribution License.
- Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgment of its initial publication in this journal.
- Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges and earlier and greater citation of published work.
References
Anthony, Z. (2018). Kajian Pengembangan Lilitan Motor Induksi 1-Fasa Dengan Bentuk Lilitan 4-Fasa (Studi Kasus: Daya Keluaran dan Faktor Daya). Jurnal Teknik Elektro ITP, 7(2), 95–100. https://doi.org/10.21063/jte.2018.3133713
Anthony, Z., & Erhaneli, E. (2018). Desain Lilitan Motor Induksi 1-Fasa dengan 4 Kumparan yang Tidak Identik Sama. Eeccis, 12(2), 89–92. https://doi.org/10.21776/jeeccis.v12i2.549
Anthony, Z., & Erhaneli, E. (2020). Kinerja Motor Induksi 1-fasa Disain 4 Kumparan dengan Kapasitansi Kapasitor Jalan Terkendali. Elkha: Jurnal Teknik Elektro, 12(1), 7–12. https://doi.org/10.26418/elkha.v12i1.37857
Anthony, Z., Saputra, A. A., Arif, M., & Aulia, F. (2019). Kajian Penggunaan Sistem Kendali Pwm Untuk Mengontrol Arus Kumparan Bantu Motor Induksi 1-Fasa. In Seminar Nasional Peranan Iptek Menuju Industri Masa Depan (PIMIMD-5). https://doi.org/10.21063/PIMIMD5.2019.20
Fauzi, A., Aisuwarya, R., & Aisuwarya, R. (2020). Sistem Kendali Jarak Jauh dan Monitoring Penggunaan Listrik pada Pompa Air melalui Smartphone. JITCE (Journal of Information Technology and Computer Engineering), 4(01), 32–39. https://doi.org/10.25077/jitce.4.01.32-39.2020
Fauzi, A. F., & Irianto, C. G. (2021). Rancang Bangun Kursi Getar Peningkat Fokus pada Masinis MRT Jakarta menggunakan Motor Induksi Satu Fasa 50 Watt berbasis Arduino UNO. Kocenin Serial Konferensi, 1(1), 2–8. Google Scholar
Gunawan, I. (2013). Panduan Menggulung Ulang Kumparan Motor Listrik Satu Fasa. Yogyakarta: Andi Offset.
Hidayat, F. A. (2020). Unjuk Kerja Motor Brushless Direct Current Axial Flux 3 Fasa Stator Ganda Terhadap Perbedaan Jenis Kawat Enamel Pada Kumparan Stator. Dielektrika, 7(2), 94–105. https://doi.org/10.29303/dielektrika.v7i2.244
Indraswari, R. R., & Yuhan, R. J. (2017). Faktor-Faktor Yang Memengaruhi Penundaan Kelahiran Anak Pertama Di Wilayah Perdesaan Indonesia: Analisis Data Sdki 2012. Jurnal Kependudukan Indonesia, 12(1), 1–12. https://doi.org/10.14203/jki.v12i1.274
Irvawansyah, I., & Rahmansyah, A. A. (2018). Prototype of Monitoring and Control System of SCADA-based Water Tank Level. JTT (Jurnal Teknologi Terapan), 4(1), 27–32. https://doi.org/10.31884/jtt.v4i1.88
Mardiana, A., & Saleh, A. (2022). Pemberian Reward Terhadap Peningkatan Motivasi Kerja Karyawan Dalam Perspektif Islam. MUTAWAZIN (Jurnal Ekonomi Syariah), 2(1), 1–14. https://doi.org/10.54045/mutawazin.v2i1.112
Pemerintah Kabupaten Deli Serdang. (2019). Visi dan Misi Kabupaten Deli Serdang Tahun 2019 - 2024. Pemerintah Kabupaten Deli Serdang. https://portal.deliserdangkab.go.id/visi-misi.html
Setiadi, I. (2018). Perancangan Sistem Kontrol Otomatis Air Baku Dan Air Produksi Pada Unit Arsinum Smk Al-Kahfi Kabupaten Sumbawa. Jurnal Rekayasa Lingkungan, 10(2), 91–98. https://doi.org/10.29122/jrl.v10i2.2849
Sihombing, P. (2023). Prototipe Pengawasan Suhu secara Real-Time dan Pengontrolan Dua Motor Listrik secara Otomatis Berbasis IoT. Elektriese: Jurnal Sains Dan Teknologi Elektro, 13(01), 83–94. https://doi.org/10.47709/elektriese.v13i01.2723
Tampubolon, K., Alinur, A., Elazhari, E., Ermawy, A., & Manurung, R. S. (2021). Penyuluhan Tentang Mengenal Mesin Pompa Air dan Cara Perawatannya di Serikat Tolong Menolong Nurul Iman (STMNI) Kelurahan Timbang Deli Kecamatan Medan Amplas. Journal Liaison Academia and Society (J-LAS), 1(2), 1–8. https://doi.org/10.58939/j-las.v1i2.192
Usman, U., Dwiyanto, D., Panjaitan, A., Amren, H., & Sihombing, P. M. (2023). Pelatihan menggulung ulang kumparan motor listrik Alternating Current 1 phasa di Kelurahan Jati Makmur Kecamatan Binjai Utara. Jurnal Derma Pengabdian Dosen Perguruan Tinggi (Jurnal DEPUTI), 3(1), 134–139. https://doi.org/10.54123/deputi.v3i1.235